High-Current Solar Module Bussing · Ahmedabad, Gujarat, India

PV Busbar & PV Busbars —
Tinned Copper Solar Busbars for M10 & G12 Modules.

SolRaw Energy manufactures precision flat PV busbars (solar photovoltaic busbar ribbons & bus wires) from virgin ≥ 99.98% EC/OFC copper with burr-free natural round edges (R-edge). Engineered for ultra-low voltage drop, ≥ 100% IACS conductivity, and jam-free automated bussing in 550W to 720W+ N-Type TOPCon, HJT, and Mono PERC solar panels.

✓ 2.0 – 10.0 mm Widths✓ 0.15 – 0.50 mm Thickness✓ Natural Round Edge (R-Edge)✓ ≥ 99.98% EC / OFC Copper✓ ≥ 100% IACS Conductivity✓ Elongation ≥ 28%✓ Camber ≤ 2.0 mm/m✓ SnPb / Ag / Lead-Free / Black✓ SEMI PV18 & PV19
SolRaw PV Busbar & PV Busbars — Precision Tinned Copper Solar Module Busbar Spools Manufactured in Gujarat, India

R-Edge Precision Rolling · Ahmedabad, Gujarat

Custom widths (2.0–10.0 mm) · Standard, Silver-Bearing & Matte Black PV Busbars

On this page:1. Component vs. Cell Busbars2. Ampacity & Loss Calculator3. 4 Types of PV Busbars4. Full Dimension Table5. 10 Technical FAQs6. Request Sample Spool

Solar Conductor Architecture

Understanding PV Busbars: Component Busbar Strips vs. Module Busbar Counts (9BB–20BB)

In photovoltaic module manufacturing, PV Busbar and PV Busbars refer both to the flat tinned-copper collector strips that carry total string current to the junction box and to the Multi-Busbar (MBB) layout across the solar cells. SolRaw engineers both conductors as a matched low-resistance system:

1. Natural Round Edges (R-Edge Insulation Safety)

Unlike slit copper strips that leave microscopic edge burrs, SolRaw rolls every PV busbar from precision-drawn round copper wire. The resulting smooth natural round edge (R-edge) prevents EVA/POE encapsulant puncture and backsheet Hi-Pot failure during vacuum lamination.

2. High-Ampacity Cross-Section for M10 & G12

Modern bifacial TOPCon and G12 210mm modules generate string currents exceeding 15 A to 18.5 A. Our ≥ 99.98% EC/OFC copper busbars deliver ≥ 100% IACS conductivity (≤ 0.01724 Ω·mm²/m), keeping current density low and eliminating junction-end hot spots.

3. Ultra-Flat Layup & ≤ 2.0 mm/m Camber

Automated bussing robots require dead-flat busbar payoff so all 10 to 20 MBB interconnect wires make simultaneous contact during induction/IR bussing. We maintain camber straightness at ≤ 2.0 mm per 1,000 mm and elongation above 28%.

Interactive Engineering Tool

PV Busbar Cross-Section, Resistance & MW Tonnage Calculator

Select your busbar width, thickness, module operating current (Imp), and monthly MW capacity to verify electrical resistance, ohmic power loss, and monthly busbar requirement.

Electrical & BOM Analysis (4.5 × 0.30 mm)

Cross-Section Area1.35 mm²
Monthly Busbar Needed1,250 kg
DC Resistance (20°C): 0.0128 Ω / meter (≥100% IACS)
Current Density at 13.8 A: 10.22 A/mm² (Consider Wider Busbar)
Est. Bussing Ohmic Loss: 5.85 W per module

Product Range

4 Specialized Types of PV Busbars Manufactured by SolRaw

Engineered for standard utility-scale bifacial panels, aesthetic all-black residential modules, and automated bussing lines:

Most Popular · 3.0–8.0 mm

1. Standard Flat R-Edge Tinned Copper PV Busbars

Precision-rolled from virgin ≥ 99.98% EC-grade ETP/OFC copper wire with smooth, burr-free natural rounded edges (R-edge). Prevents EVA/POE encapsulant puncture during vacuum lamination and delivers ≥ 100% IACS conductivity.

Aesthetic Rooftop & BIPV

2. Matte Black PV Busbars (All-Black Aesthetic Modules)

Engineered with a specialized UV-stable, solderable black surface finish or black conductive masking tape compatibility. Eliminates metallic glare at the head, center, and tail of full-black residential and architectural solar panels.

Sn62Pb36Ag2 & SAC305

3. Silver-Bearing & Lead-Free RoHS PV Busbars

Coated with 2%–3% silver-bearing solder alloys (Sn62Pb36Ag2 or Lead-Free Sn96.5Ag3.0Cu0.5) to eliminate silver scavenging on multi-wire interconnect joints and satisfy strict EU/US RoHS & REACH export mandates.

Automated Bussing Lines

4. L-Shaped, Pre-Punched & Auto-Bussing Strips

Supplied on precision-wound DIN 160 / DIN 200 / DIN 250 spools or pre-cut L-type/U-type strips with ultra-low camber (≤ 2.0 mm/m) for seamless feeding on Autowell, Jinchen, and Lead automated bussing and layup stations.

SEMI PV18 & PV19 Certified

Complete PV Busbar Dimensions & Mechanical Specifications

Standard sizes stocked for immediate dispatch from Ahmedabad, Gujarat. Custom widths (2.0 mm – 10.0 mm) and thicknesses (0.10 mm – 0.60 mm) rolled to order.

SolRaw Tinned Copper PV Busbars — Dimensional, Electrical & Mechanical Tolerance Chart
Width × ThicknessAreaTolerance (W / T)Solder CoatYield StrengthElongationCamberPrimary Solar Module Application
2.5 mm × 0.20 mm0.50 mm²±0.03 / ±0.005 mm15 – 25 µm≤ 70 N/mm²≥ 26%≤ 2.5 mm/mCompact BIPV, solar tiles & off-grid panels
3.0 mm × 0.20 mm0.60 mm²±0.03 / ±0.005 mm18 – 25 µm≤ 70 N/mm²≥ 26%≤ 2.5 mm/mSub-string bussing & compact J-Box leads
3.5 mm × 0.25 mm0.88 mm²±0.03 / ±0.005 mm18 – 28 µm≤ 70 N/mm²≥ 27%≤ 2.5 mm/mM10 182mm center cross-connect busbar
4.0 mm × 0.25 mm1.00 mm²±0.04 / ±0.005 mm18 – 28 µm≤ 70 N/mm²≥ 28%≤ 2.0 mm/mM10 Half-Cut head & tail string busbar
4.5 mm × 0.30 mm1.35 mm²±0.04 / ±0.005 mm20 – 30 µm≤ 72 N/mm²≥ 28%≤ 2.0 mm/m540W–600W N-Type TOPCon M10/G12R panels
5.0 mm × 0.30 mm1.50 mm²±0.05 / ±0.008 mm20 – 30 µm≤ 72 N/mm²≥ 28%≤ 2.0 mm/mStandard 144-cell & 132-cell utility modules
5.0 mm × 0.35 mm1.75 mm²±0.05 / ±0.008 mm20 – 32 µm≤ 75 N/mm²≥ 29%≤ 2.0 mm/mHigh-current bifacial TOPCon & HJT modules
5.5 mm × 0.35 mm1.92 mm²±0.05 / ±0.008 mm20 – 32 µm≤ 75 N/mm²≥ 30%≤ 2.0 mm/mG12 210mm 650W–710W high-ampacity busbar
6.0 mm × 0.40 mm2.40 mm²±0.05 / ±0.010 mm22 – 35 µm≤ 78 N/mm²≥ 30%≤ 2.0 mm/mUltra-high current 18A+ G12 utility modules
8.0 mm × 0.45 mm3.60 mm²±0.06 / ±0.010 mm22 – 35 µm≤ 80 N/mm²≥ 30%≤ 2.0 mm/mHeavy-duty junction box output & main bus

PV Busbar Engineering Guide

Frequently Asked Questions About PV Busbar & PV Busbars

Key technical specifications and sourcing answers for solar panel manufacturers and procurement engineers.

A PV busbar (photovoltaic busbar, solar busbar ribbon, or bus wire) is a flat, tinned-copper conductor strip placed along the head, middle, and tail of solar cell strings. While thinner interconnect PV ribbons collect current directly from the silicon solar cells, PV busbars collect the combined current from all cell strings in parallel/series and carry it into the module junction box with minimal voltage drop.

Direct Factory Supply · Gujarat, India

Order Custom-Width PV Busbars & MBB Ribbons Direct from SolRaw.

Share your PV busbar dimensions (width × thickness), solder coating alloy, spool format, and monthly tonnage. We dispatch qualification sample spools with full lab test reports within 24–48 hours.

24-hour response · 100% replacement quality guarantee · Made in Ahmedabad, Gujarat